Describe it once
Instead of repeating the same details to multiple companies, you explain the shower remodel you want once and get connected with a local contractor who handles this type of work.
Shower remodeling referrals in Orlando
Shower Remodel Orlando
Describe your shower update once and we'll connect you with a local contractor who can take measurements, talk through options, and handle the remodel.
Call Now 407-449-7697✓Describe the shower once
✓Connect with a local contractor
✓Discuss measurements and options
✓You decide how to proceed
Project scope
What a shower remodel covers (and what a contractor will look at first)
A shower remodel can be a straightforward refresh or a full rebuild, but the goal is the same: a shower that looks right, drains right, and stays dry behind the walls.
When you call about a shower remodel in Orlando, the contractor you're connected with will usually start by figuring out what's already there and what has to change. The first questions are practical: Is the current shower leaking? Is the floor soft or the grout staying dark and damp? Is the layout staying the same, or do you want to move the valve, the drain, or the entry?
Most shower remodels include a mix of these tasks:
- Demo and prep: Removing old tile or panels, inspecting the framing and subfloor, and fixing any water damage before anything new goes in.
- Waterproofing (the non-negotiable part): A shower should be built with a continuous waterproofing system. A contractor may use a sheet membrane system, a liquid-applied membrane, or a traditional liner setup for a mortar bed, depending on the design.
- Drain and slope work: The shower floor has to slope to the drain correctly. This is also when the drain type matters, such as a center drain or a linear drain.
- Backer and wall build-out: Cement backer board or foam shower boards are common substrates for tile work. Regular drywall is not used in wet areas behind tile in a shower.
- Tile, grout, and sealant details: Tile layout, grout type, and movement joints affect how the shower holds up. Corners and changes of plane are typically handled with a flexible sealant rather than grout.
- Fixtures and trim: Valve trim, shower head type, hand shower, diverters, and pressure-balancing valve considerations.
- Glass and ventilation tie-ins: If you're adding a glass enclosure, measurements and wall readiness matter. Good bathroom ventilation matters too because humidity is part of daily life in Central Florida.
If you are combining the shower work with a bigger bathroom update, it can help to think through the full scope upfront; many homeowners plan the shower as part of bathroom remodeling in Orlando so the waterproofing, plumbing, lighting, and finishes all line up.
One-call referral
Why homeowners use Bathroom Remodeling Orlando for a shower remodel
Start with one description of the shower you have and the changes you want.
Local contractors who serve Orlando-area homes
Whether you're in a newer subdivision with acrylic pans or an older home with a traditional mortar bed, the contractor you speak with is used to the local mix of construction types.
You stay in control of the decision
You talk directly with the contractor about design, materials, and scheduling, then choose whether to move forward based on their plan and quote.
Help matching the job to the right trade
A shower remodel can involve tile setting, plumbing, glass, and ventilation. We focus on connecting you with a contractor who can take ownership of the full scope.
Clear expectations before demolition starts
The contractor can walk you through what needs to be opened up, what will be protected, and how the shower is rebuilt layer by layer, not just what it will look like.
Four clear steps
How a shower remodel connection works
01
Call and describe the shower
Share what you have now (tile, fiberglass insert, walk-in), what you want to change, and whether you've seen any signs of leaking or damage.
02
We connect you with a local contractor
You're matched with an independent contractor who works in the Orlando area and takes on shower remodel projects.
03
On-site evaluation and options
The contractor checks measurements, plumbing locations, wall condition, and waterproofing needs, then talks through design options like tile patterns, niches, benches, and glass.
04
You get the scope and quote from the contractor
The contractor provides the plan for materials and labor, what is included, and any choices that affect the build. You decide whether it's the right fit.
If your shower is dated, hard to clean, or showing water damage, a short call can get you connected with a local contractor who can inspect it and lay out the remodel options.
Call Now 407-449-7697
Common questions
Shower remodel Orlando: questions to ask before you start
Should I keep the shower layout or move the plumbing?
Keeping the valve and drain in the same place usually reduces wall and floor work, but moving them can improve usability and door or glass placement. The contractor will look at where the existing supply lines and drain run and explain what changes are practical once the walls are opened.
What are common signs a shower needs more than new tile?
Soft spots, loose tile, recurring mildew smell, or grout that stays dark and damp can point to water getting past the surface. A contractor can confirm what is happening by checking the substrate condition and looking for damage around the curb, corners, and valve wall.
What waterproofing methods are used in a tiled shower?
A tiled shower is built around a complete waterproofing system, such as a sheet membrane, a liquid-applied membrane, or a traditional pan liner with a mortar bed. The key is continuity at seams, corners, niches, and the drain connection, because tile and grout are not the waterproof layer.
Is a prefab shower pan or a tiled base better?
A prefab pan can be a good choice when you want a clean look with fewer grout lines on the floor, while a tiled base offers more flexibility for sizes, layouts, and drain locations. The contractor can recommend a base type based on the dimensions, curb height preference, and the rest of the shower design.
Can I convert a tub to a walk-in shower?
A tub-to-shower conversion is common, but it depends on plumbing location, drain position, and how the surrounding walls are built. If you're considering it, mention it on the call so the contractor can plan for demolition, waterproofing, and the right glass or door setup.
What details should I have ready when I call about a shower remodel?
A quick description of the current shower type, approximate size, any leaking or soft spots, and what you want to change (tile style, niche, bench, glass, fixtures) helps the contractor plan the next step. Photos on your phone can also help once you're speaking with the contractor directly.
How do permits work for shower remodeling in Orlando?
Permitting often depends on the scope, especially if plumbing is being altered or walls are opened for changes. The contractor you're connected with can tell you when permits are needed for your specific plan and how they handle the process with the local building department.
Ready to talk through your shower remodel?
Call Bathroom Remodeling Orlando and describe what you want to change. We'll connect you with a local contractor who can review the layout, waterproofing approach, and finish options, then give you the scope to decide.
Call Now 407-449-7697